TOA B-41S Balanced Line Input with Mute-Send Module for 900 Series Mixer Power Amplifiers - OUT OF BOX

TOA B-41S Balanced Line Input with Mute-Send Module for 900 Series Mixer Power Amplifiers - OUT OF BOX:

TOA B-41S Bridging Transformer Module for 900 Series Mixer Power Amplifiers.

Use the B-41S module to connect to most modern telephone system's "Page Output" (usually line level)

NOTE: This is an open box since the item was previously exchanged for customer. There are minor cosmetic scratches on top of front panel. (See photo)

•  For Balanced Or Unbalanced Line Level Sources such
as mixer outputs, signal processors and wireless
microphone receivers.

•  Transformer Isolation (10 kΩ) minimizes ground loop
problems when connecting remote equipment (greater than
15 feet).

•  Signal At Input Terminals Activates Both Mute Bus #
1 and Mute Bus # 2 by Default (cut diode(s) to
disconnect individual mute bus).

•  Tip! Use the B-41S to connect to most modern telephone
system's "Page Output" (usually line level).

•  Connector: removable terminal block (B-41S).

•  Faceplate Controls: Mute send sensitivity

•  PCB Controls Mute bus selection

•  Input Impedance 10 kohms, balanced transformer-isolated

•  Sensitivity -16 dBu, min.