null
JBL

JBL Control 29AV-1-WH 300W RMS Indoor/Outdoor Speaker with Built-In Wall Mount - BLACK (ea)

SKU:
JBLCONTROL29AV-1-BLACK
UPC:
50036903387
MPN:
CONTROL29AV-1-BLACK
Availability:
Priced EACH - sold in PAIRS
Minimum Purchase:
2 units
Shipping:
Free Shipping
  • JBL Control 29AV-1-WH (ea) BLACK
UPC: 050036903387
  • JBL Control 29AV-1-WH (ea) WHITE
UPC: 050036903394
MSRP: $605.86
$482.00
— You save $123.86

Description

JBL Control 29AV-1-WH 300W RMS Indoor/Outdoor Speaker with Built-In Wall Mount - BLACK:

Ultra-Compact Indoor/Outdoor Background/Foreground Speaker
 
High Output Indoor/Outdoor Monitor Speaker.  150W Pink Noise, 300W Program Power, 92 dB Sensitivity.  70V/100V    Taps at 110W, 55W, & 28W (and 14W at 70V) plus 8 ohm  Thru.  110° x 80° Coverage with Rotatable Horn.  Built-In Invisiball® Installation System plus Ten M6 Suspension Points.  Kevlar Cone Woofer and Titanium Compression Driver. Includes Sonicguard(tm) Overload Protection.  Includes MTC-PC2 Sealed-Entrance Panel Cover.
 
Priced EACH - sold in PAIRS
 
Available Colors:
 
 
FEATURES:
  • Extended bandwidth, extremely smooth frequency response.
  • 110° x 85° HF coverage, rotatable horn.
  • 110 W transformer for 70 V or 100 V lines, with 8 ohm thru.
  • SonicGuard™ overload protection.
  • 200 mm (8 in) Kevlar cone woofer,
    25 mm (1 in) titanium diaphragm compression driver.
  • Includes InvisiBall™ mounting hardware, plus ten 6 mm attachment points for suspension and
    optional U-bracket.
  • Sealed input panel cover and screwdown input terminals.

UPDATED: 5-31-22

SPECIFICATIONS.:

  Frequency Range 37 Hz –18 kHz (-10 dB)
  Power Capacity 300 W Continuous Program Power; 150 W Continuous Pink Noise
  Transformer Taps 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W,
Thru Position: 8 ohms nominal
  Frequency Response 45 Hz – 18 kHz ( ± 3 dB)
  Maximum SPL @ 1m Short-Term: 120 dB; Long-Term: 114 dB
  Nominal Sensitivity 90 dB (2.83V / 1m)
  Nominal Coverage Angle 110° H x 85° V, rotatable
  Directivity Factor (Q) 7.2 dB, averaged 500 Hz to 16 kHz
  Directivity Index (DI) 8.6 dB, averaged 500 Hz to 16 kHz
  Nominal Impedance 8 ohms
  Minimum Impedance 6.3 ohms @ 230 Hz
  Crossover Network 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
  Low Frequency 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
  High Frequency 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
  Enclosure Material High impact polystyrene
  Grille Thermoset composite coated steel, WeatherMax multi-layer foam
  Overload Protection Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
  Environmental IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
  Terminations Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
  Safety Agency Rating Transformer is listed per UL1876
  Colors Black or white (-WH)
  Dimensions (H x W x D) 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
  Net Weight (ea) 12.2 kg (26.8 lb.)
  Shipping Weight (ea) 14.0 kg (30.8 lb.)
  Included Accessories 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
  Optional Accessories

MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket

View AllClose