ART MX622 – 6 Ch (1U) Stereo Mixer with EQ/EFX Loop

Free Shipping
  • Rolls MX622 – 6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop
  • Rolls MX622 – 6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop - Rear View
  • Rolls MX622 – 6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop
MSRP: $239.99
— You save $50.11
Frequently bought together:


ART MX622 – 6 Ch (1U) Stereo Mixer w/ EQ/EFX Loop:

The ART MX622 Six Channel Stereo Mixer with EQ and Effects Loop is a versatile mixer combining three-balanced microphone or line level inputs with three stereo line inputs into a single stereo line level mix. Each mono balanced XLR input includes fully variable Input gain, Mic/Line switch, Clip indicator, and selectable 15 Volt Phantom power. An external effects loop section provides a mono Send from the three Mic/Line channels to external equipment and stereo Returns with Effects Level and In/Out switch. Three stereo line level inputs are also provided via RCA type jacks with separate Level controls for each stereo pair. Stereo Record output RCA jacks provide full-level signal of the entire mix at all times. Main outputs are stereo balanced ¼-inch TRS with Master Level and full range Bass/Treble equalization. The built in power supply and single high 19” rack mount format allows for easy installation and reliable operation.


• Three balanced XLR inputs with separate Mic/Line switch, Level control and Clip Indicator
• Three pairs of RCA stereo inputs with separate Level controls
• Selectable 15 Volt Phantom power for each Mic channel
• Balanced ¼-inch TRS Main outputs with Master Level control
• Versatile Bass and Treble equalization on Main outputs
• Stereo Record Out RCA jacks • Effects Loop with Effects Level control and In/Out switch
• ¼-inch Effects Send with stereo Returns


  • Input Connections     
  • XLR-F balanced (x3)
  • 1/4-inch unbalanced (x2)
  • 3 pairs stereo RCA (6 total)
  • Output Connections     
  • TRS balanced 1/4-inch (x2)
  • 1/4-inch unbalanced (x1)
  • RCA (x2)
  • Input Impedance: 600/22K Ω mic/line XLR inputs / 10K Ω RCA inputs / 22K Ω 1/4-inch effects returns
  • Output Impedance: 50 Ω 1/4-inch main outputs / 1K Ω RCA record outputs / 100 Ω effects output
  • Total Harmonic Distortion: .01% Typical
  • Signal to Noise Ratio     > 90dB typical
  • Maximum Input Level     -10dBu/+20dBu mic/line XLR inputs / +20dBu RCA line inputs / +20dBu Effects inputs
  • Maximum Output Level     +24dBu balanced main outputs / +20dBu RCA record outputs / +20dBu Effects output
  • Maximum Gain     56dB/26dB mic/line / 26dB RCA inputs
  • Phantom Power     +15Volts DC (regulated / low noise)
  • Power Requirements     USA – 105 to 125 VAC / 50-60Hz, 15 W typical
  • Equalizer Range     +/-12dB @ 100Hz & 10kHz
    Dimensions     1.75″H x 19″W x 6.0″D (44.5mm x 483mm x 152mm)
  • Weight     6.2 lbs (2.8 kg)
View AllClose